Slender and Sustainable Structures LabModulbeschreibung #50989 / Version 2
- 6 LP
- Portfolioprüfung
- Benotet
- Sommersemester
- Englisch
| Modul / Version | #50989 / #2 |
|---|---|
| Gültigkeit | Seit WiSe 2024/25 |
| Verfügbare Sprache(n) | Englisch |
| Leistungspunkte | 6 |
| Modulverantwortliche*r | Völlmecke, Christina |
| Benotung | Benotet |
| Prüfungsform | Portfolioprüfung |
| Lehrsprache(n) | Englisch |
Zugehörigkeit
| Fakultät | Fakultät V |
|---|---|
| Institut | Institut für Mechanik |
| Fachgebiet | 35374100 FG Mechanik insbesondere Stabilität und Versagen funktionsoptimierter Strukturen |
Kontakt
| Sekretariat | Keine Angabe |
|---|---|
| Ansprechpartner*in | Keine Angabe |
| E-Mail-Adresse | christina.voellmecke@tu-berlin.de |
| Webseite | Keine Angabe |
Lernergebnisse
The learning outcomes of the module are:
- Understanding the fundamental concept of elastic stability theory, geometric nonlinearities and post-buckling
- Understanding and analysing fundamental elastic (in-)stability phenomena and post-buckling
- Obtain an understanding of exploiting post-buckling and large deformation characteristics for enhanced structural performance and advanced structures/materials
- Developing analytical models of slender structures
- Analysing and evaluating the mechanical behaviour of slender structures with the aid of (non-)commercial (open source) computational software tools (analytical and numerical tools, e.g. Pyfurc, AUTO, Python, Matlab, Maple, Fortran, Abaqus, etc.)
- Understanding the fundamentals of sustainable and ressource efficient structures
- Understanding the fundamentals of extrusion based additive manufacturing
- Writing of scientific reports and preparing scientific presentations
- Ability to work in a team to solve engineering problems
- Understanding the fundamental concept of elastic stability theory, geometric nonlinearities and post-buckling
- Understanding and analysing fundamental elastic (in-)stability phenomena and post-buckling
- Obtain an understanding of exploiting post-buckling and large deformation characteristics for enhanced structural performance and advanced structures/materials
- Developing analytical models of slender structures
- Analysing and evaluating the mechanical behaviour of slender structures with the aid of (non-)commercial (open source) computational software tools (analytical and numerical tools, e.g. Pyfurc, AUTO, Python, Matlab, Maple, Fortran, Abaqus, etc.)
- Understanding the fundamentals of sustainable and ressource efficient structures
- Understanding the fundamentals of extrusion based additive manufacturing
- Writing of scientific reports and preparing scientific presentations
- Ability to work in a team to solve engineering problems
Lehrinhalte
In this module, the following topics will be taught:
- Introduction to elastic stability theory, geometric nonlinearites and post-buckling of structures
- Elastic (in-)stability phenomena (e.g. stable and unstable bifurcations / buckling),
- Principle of exploiting structural (in-)stabilities, post-buckling and large deformations in enhancing structural performance
- Quick guide on extrusion based additive manufacturing
- Fundamentals of sustainable structural configurations and material choices
Students will work in small groups (up to 5 students) on research projects comprising applications of structural (in-)stabilities and sustainbel structures.
The group work will comprise:
- Familiarization with the project/topic and necessary software
- Developing a solution strategy and associated time planning
- Developing analytical and/or computational models
- Analyse and evaluate the structural behaviour in the (post-)buckling range
- Assess the ressource efficiency of the structures
- Writing scientific-technical reports
- Preparing and holding scientific presentations
The group work shall also include:
- Prototyping with the aid of extrusion based additive manufacturing
- Demonstrating the deformation characteristics with the aid of the prototypes
- Introduction to elastic stability theory, geometric nonlinearites and post-buckling of structures
- Elastic (in-)stability phenomena (e.g. stable and unstable bifurcations / buckling),
- Principle of exploiting structural (in-)stabilities, post-buckling and large deformations in enhancing structural performance
- Quick guide on extrusion based additive manufacturing
- Fundamentals of sustainable structural configurations and material choices
Students will work in small groups (up to 5 students) on research projects comprising applications of structural (in-)stabilities and sustainbel structures.
The group work will comprise:
- Familiarization with the project/topic and necessary software
- Developing a solution strategy and associated time planning
- Developing analytical and/or computational models
- Analyse and evaluate the structural behaviour in the (post-)buckling range
- Assess the ressource efficiency of the structures
- Writing scientific-technical reports
- Preparing and holding scientific presentations
The group work shall also include:
- Prototyping with the aid of extrusion based additive manufacturing
- Demonstrating the deformation characteristics with the aid of the prototypes
Modulbestandteile
Pflichtbereich
Die folgenden Veranstaltungen sind für das Modul obligatorisch:
| Lehrveranstaltungen | Art | Nummer | Turnus | Sprache | SWS | VVZ |
|---|---|---|---|---|---|---|
| Slender and Flexible Structures Lab | Projekt | Winter- und Sommersemester | [en] | 4 | ISIS |
Arbeitsaufwand und Leistungspunkte
Slender and Flexible Structures Lab (Projekt)
| Aufwandbeschreibung | Multiplikator | Stunden | Gesamt |
|---|---|---|---|
| Präsenzzeit | 15 | 4 h | 60 h |
| Vor-/Nachbereitung | 15 | 8 h | 120 h |
| 180 h | |||
Der Aufwand des Moduls summiert sich zu 180 Stunden. Damit umfasst das Modul 6 Leistungspunkte.
Beschreibung der Lehr- und Lernformen
- Introductory session: Presentation of the topics to be worked on with subsequent selection of the topic to be worked on/group work
- Development of the basics of the respective topic in small groups
- Group work in "hands-on" processing of a current research topic in small groups (max. 5 persons,)
- Intermediate presentation and discussion
- Further processing of the topics in the small groups
- Preparation of a final report or publication
- Poster presentation and discussion
- Development of the basics of the respective topic in small groups
- Group work in "hands-on" processing of a current research topic in small groups (max. 5 persons,)
- Intermediate presentation and discussion
- Further processing of the topics in the small groups
- Preparation of a final report or publication
- Poster presentation and discussion
Voraussetzungen für die Teilnahme / Prüfung
Wünschenswerte Voraussetzungen für die Teilnahme an den Lehrveranstaltungen:
Mechanik I und II, Energiemethoden, Kenntnisse in Leichtbaustrukturen, Kenntnisse in CAD, Konstruktion, 3D Druck in der Mechanik
Verpflichtende Voraussetzungen für die Modulprüfungsanmeldung:
Dieses Modul hat keine Prüfungsvoraussetzungen.
Abschluss des Moduls
| Benotung | Benotet |
|---|---|
| Prüfungsform | Portfolioprüfung |
| Art der Portfolioprüfung | 100 Punkte insgesamt |
| Sprache | Englisch |
Prüfungselemente
| Name | Punkte/Gewicht | Kategorie | Dauer/Umfang |
|---|---|---|---|
| Oral Presentation | 30 | mündlich | 15 min |
| Pitch | 30 | mündlich | 5 min |
| Written Scientific Report | 40 | schriftlich | max. 25 pages |
Prüfungsbeschreibung (Abschluss des Moduls)
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Dauer des Moduls
Für Belegung und Abschluss des Moduls ist folgende Semesteranzahl veranschlagt: 1 Semester.
Dieses Modul kann in folgenden Semestern begonnen werden: Sommersemester.
Maximale teilnehmende Personen
Die maximale Teilnehmerzahl beträgt 15.
Anmeldeformalitäten
The procedure for enrollment will be provided to students in the first week of term.
Enrollment will be made avaialble via QISPOS.
Enrollment is confirmed by participating in the pitch.
Enrollment will be made avaialble via QISPOS.
Enrollment is confirmed by participating in the pitch.
Literaturhinweise, Skripte
Skript in Papierform
nicht verfügbar
Skript in elektronischer Form
nicht verfügbar
Empfohlene Literatur
Keine empfohlene Literatur angegeben
Zugeordnete Studiengänge
Diese Modulversion wird in folgenden Studiengängen verwendet:
| Studiengang / StuPO | Semester | Studiengangsbereich |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SoSe 2025 | 2. Kernbereich: Simulation und Optimierung |
| WiSe 2025/26 | 2. Kernbereich: Simulation und Optimierung | |
| SoSe 2026 | 2. Kernbereich: Simulation und Optimierung | |
| WiSe 2026/27 | 2. Kernbereich: Simulation und Optimierung | |
| Luft- und Raumfahrttechnik StuPO 2018 | SoSe 2025 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau |
| WiSe 2025/26 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| SoSe 2026 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| WiSe 2026/27 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| Maschinenbau StuPO 2017 | WiSe 2024/25 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| SoSe 2025 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WiSe 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| SoSe 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WiSe 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| Physikalische Ingenieurwissenschaft StuPO 09.01.2012 | SoSe 2025 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| WiSe 2025/26 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| SoSe 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| Physikalische Ingenieurwissenschaft StuPO 2007 (19.12.2007) | SoSe 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WiSe 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SoSe 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Physikalische Ingenieurwissenschaft StuPO 2020 | SoSe 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WiSe 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SoSe 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| WiSe 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Physikalische Ingenieurwissenschaft StuPO 2020 | SoSe 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WiSe 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| SoSe 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| WiSe 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
Sonstiges
Keine Angabe