Slender and Sustainable Structures LabModule description #50989 / Version 2
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- English
| Module / Version | #50989 / #2 |
|---|---|
| Validity | Since Winter semester 2024/25 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Völlmecke, Christina |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Mechanik |
| Academic chair | 35374100 FG Mechanik insbesondere Stabilität und Versagen funktionsoptimierter Strukturen |
Contact
| Office | Not specified |
|---|---|
| Contact person | Not specified |
| E-mail address | christina.voellmecke@tu-berlin.de |
| Website | Not specified |
Learning outcomes
The learning outcomes of the module are:
- Understanding the fundamental concept of elastic stability theory, geometric nonlinearities and post-buckling
- Understanding and analysing fundamental elastic (in-)stability phenomena and post-buckling
- Obtain an understanding of exploiting post-buckling and large deformation characteristics for enhanced structural performance and advanced structures/materials
- Developing analytical models of slender structures
- Analysing and evaluating the mechanical behaviour of slender structures with the aid of (non-)commercial (open source) computational software tools (analytical and numerical tools, e.g. Pyfurc, AUTO, Python, Matlab, Maple, Fortran, Abaqus, etc.)
- Understanding the fundamentals of sustainable and ressource efficient structures
- Understanding the fundamentals of extrusion based additive manufacturing
- Writing of scientific reports and preparing scientific presentations
- Ability to work in a team to solve engineering problems
- Understanding the fundamental concept of elastic stability theory, geometric nonlinearities and post-buckling
- Understanding and analysing fundamental elastic (in-)stability phenomena and post-buckling
- Obtain an understanding of exploiting post-buckling and large deformation characteristics for enhanced structural performance and advanced structures/materials
- Developing analytical models of slender structures
- Analysing and evaluating the mechanical behaviour of slender structures with the aid of (non-)commercial (open source) computational software tools (analytical and numerical tools, e.g. Pyfurc, AUTO, Python, Matlab, Maple, Fortran, Abaqus, etc.)
- Understanding the fundamentals of sustainable and ressource efficient structures
- Understanding the fundamentals of extrusion based additive manufacturing
- Writing of scientific reports and preparing scientific presentations
- Ability to work in a team to solve engineering problems
Content
In this module, the following topics will be taught:
- Introduction to elastic stability theory, geometric nonlinearites and post-buckling of structures
- Elastic (in-)stability phenomena (e.g. stable and unstable bifurcations / buckling),
- Principle of exploiting structural (in-)stabilities, post-buckling and large deformations in enhancing structural performance
- Quick guide on extrusion based additive manufacturing
- Fundamentals of sustainable structural configurations and material choices
Students will work in small groups (up to 5 students) on research projects comprising applications of structural (in-)stabilities and sustainbel structures.
The group work will comprise:
- Familiarization with the project/topic and necessary software
- Developing a solution strategy and associated time planning
- Developing analytical and/or computational models
- Analyse and evaluate the structural behaviour in the (post-)buckling range
- Assess the ressource efficiency of the structures
- Writing scientific-technical reports
- Preparing and holding scientific presentations
The group work shall also include:
- Prototyping with the aid of extrusion based additive manufacturing
- Demonstrating the deformation characteristics with the aid of the prototypes
- Introduction to elastic stability theory, geometric nonlinearites and post-buckling of structures
- Elastic (in-)stability phenomena (e.g. stable and unstable bifurcations / buckling),
- Principle of exploiting structural (in-)stabilities, post-buckling and large deformations in enhancing structural performance
- Quick guide on extrusion based additive manufacturing
- Fundamentals of sustainable structural configurations and material choices
Students will work in small groups (up to 5 students) on research projects comprising applications of structural (in-)stabilities and sustainbel structures.
The group work will comprise:
- Familiarization with the project/topic and necessary software
- Developing a solution strategy and associated time planning
- Developing analytical and/or computational models
- Analyse and evaluate the structural behaviour in the (post-)buckling range
- Assess the ressource efficiency of the structures
- Writing scientific-technical reports
- Preparing and holding scientific presentations
The group work shall also include:
- Prototyping with the aid of extrusion based additive manufacturing
- Demonstrating the deformation characteristics with the aid of the prototypes
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Slender and Flexible Structures Lab | Project | Winter and summer semester | [en] | 4 | ISIS |
Workload and credit points
Slender and Flexible Structures Lab (Project)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 4 h | 60 h |
| Pre/post processing | 15 | 8 h | 120 h |
| 180 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The introductory part of the module contains lectures and tutorials complementing the practical group work.
During the module, the students will work in small groups (max. 5 students) on research projects, where they will be supervised by a lecturer.
After a few weeks, students are required to pitch their project idea.
At the end of term, students will deliver a presentation on their research project and also prepare a scientific report.
During the module, the students will work in small groups (max. 5 students) on research projects, where they will be supervised by a lecturer.
After a few weeks, students are required to pitch their project idea.
At the end of term, students will deliver a presentation on their research project and also prepare a scientific report.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Mechanik Grundveranstaltungen, Mechanik E, ggf. 3D Druck in der Mechanik
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | English |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Oral Presentation | 30 | oral | 15 min |
| Pitch | 30 | oral | 5 min |
| Written Scientific Report | 40 | written | max. 25 pages |
Exam description
To pass the module at least 50% of marks have to be attained. The maximum of marks attainable is 100.
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Grade will be assigned as shown below:
from 95 marks: 1,0
from 90 marks: 1,3
from 85 marks: 1,7
from 80 marks: 2,0
from 75 marks: 2,3
from 70 marks: 2,7
from 65 marks: 3,0
from 60 marks: 3,3
from 55 marks: 3,7
from 50 marks: 4,0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
The maximum capacity of participants is 15.
Registration procedures
The procedure for enrollment will be provided to students in the first week of term.
Enrollment will be made avaialble via QISPOS.
Enrollment is confirmed by participating in the pitch.
Enrollment will be made avaialble via QISPOS.
Enrollment is confirmed by participating in the pitch.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | SS 2025 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau |
| WS 2025/26 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| SS 2026 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| WS 2026/27 | 3. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 2. Kernbereich: Simulation und Optimierung |
| WS 2025/26 | 2. Kernbereich: Simulation und Optimierung | |
| SS 2026 | 2. Kernbereich: Simulation und Optimierung | |
| WS 2026/27 | 2. Kernbereich: Simulation und Optimierung | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich |
| WS 2025/26 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| SS 2026 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| WS 2026/27 | 2.4 Festkörpermechanik › 2.4b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| Mechanical Engineering StuPO 2017 | WS 2024/25 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WS 2025/26 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| SS 2026 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung | |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung |
Miscellaneous
Not specified