Design Methods for Sustainable Thermal SystemsModule description #31118 / Version 1
- 6 CP
- Written exam
- Graded
- Summer semester
- English
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v2)
| Module / Version | #31118 / #1 |
|---|---|
| Validity | Summer semester 2024 – Summer semester 2026 |
| Available language(s) | English |
| Credit points | 6 |
| Person responsible for the module | Elbel, Stefan |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | English |
Affiliation
| Faculty | Fakultät III |
|---|---|
| Institute | Institut für Energietechnik |
| Academic chair | 33371300 FG Wärmeübertragung und -wandlung (WÜW) |
Contact
| Office | KT 2 |
|---|---|
| Contact person | Elbel, Stefan |
| E-mail address | elbel@tu-berlin.de |
| Website | https://www.tu.berlin/wuw |
Learning outcomes
Students will
• Develop the ability to analyze and model complex thermal systems: this ability includes familiarity with the mathematical tools and methodology of modeling
• Learn how to use standard computer simulation tools to implement thermal models and characterize system behavior
• Understand the application of engineering economics in thermal system design and operation
• Attain an understanding of basic optimization methods and competence in their application to thermal systems
• Initiate thermal design experience: component characterization and selection, design motivation criteria, economic and environmental considerations, creativity and synthesis in design
• Develop the ability to analyze and model complex thermal systems: this ability includes familiarity with the mathematical tools and methodology of modeling
• Learn how to use standard computer simulation tools to implement thermal models and characterize system behavior
• Understand the application of engineering economics in thermal system design and operation
• Attain an understanding of basic optimization methods and competence in their application to thermal systems
• Initiate thermal design experience: component characterization and selection, design motivation criteria, economic and environmental considerations, creativity and synthesis in design
Content
• Thermal system design overview and workable systems
• Introduction to curve fitting, economics, sustainability aspects, refrigerant property modeling
• Component simulation: heat exchanger design and review, evaporators and condensers, pressure drop and pumping power
• System simulation: piping/pump networks, heat exchanger systems
• Optimization methods and application to thermal system design
• Introduction to curve fitting, economics, sustainability aspects, refrigerant property modeling
• Component simulation: heat exchanger design and review, evaporators and condensers, pressure drop and pumping power
• System simulation: piping/pump networks, heat exchanger systems
• Optimization methods and application to thermal system design
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Design Methods for Sustainable Thermal Systems - Part A | Lecture | 3713 L001 | Summer semester | [en] | 2 | ISIS |
| Practice Problems Sustainable Thermal Systems - Part A | Exercise | 3713 L002 | Summer semester | [en] | 1 | ISIS |
| Design Methods for Sustainable Thermal Systems - Part B | Lecture | 3713 L003 | Winter semester | [en] | 2 | WS 2026/27 (2) ISIS |
| Practice Problems Sustainable Thermal Systems - Part B | Exercise | 3713 L004 | Winter semester | [en] | 1 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (2)
Design Methods for Sustainable Thermal Systems - Part B (Lecture) 2
- Design Methods for Sustainable Thermal Systems (DMSTS) - Part B (Vorlesung) Projekttreffen 3713 L 003
- Design Methods for Sustainable Thermal Systems (DMSTS) - Part B (Vorlesung) Vorlesung 3713 L 003
Workload and credit points
Design Methods for Sustainable Thermal Systems - Part A (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Practice Problems Sustainable Thermal Systems - Part A (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 1 h | 15 h |
| 15 h | |||
Design Methods for Sustainable Thermal Systems - Part B (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 2 h | 30 h |
| 60 h | |||
Practice Problems Sustainable Thermal Systems - Part B (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 1 h | 15 h |
| 15 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Preparation for final exam | 1 | 30 h | 30 h |
| 30 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Course contents will be discussed in weekly lectures (2 SWS). Additional practice problem-solving sessions (1 SWS) to develop further understanding through relevant examples. Comprehensive final exam covering all course topics.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Prerequisite Thermodynamics 1, Heat Transfer, Heat and Mass Transfer or similar
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | English |
| Duration/Extent | Comprehensive written Final Exam at the end of Part B, duration 90 min. |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 2 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Registration for the exam through Prüfungsamt, or, if available, through online exam registration.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
unavailable
Recommended literature
- will be announced in class
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Energy Engineering and Process Engineering StuPO 2009 | SS 2025 | Vertiefung Energie- und Verfahrenstechnik |
| WS 2025/26 | Vertiefung Energie- und Verfahrenstechnik | |
| SS 2026 | Vertiefung Energie- und Verfahrenstechnik | |
| Energy Engineering and Process Engineering StuPO 2014 | SS 2025 | Wahlpflicht für den Master RES › Wahlpflicht |
| WS 2025/26 | Wahlpflicht für den Master RES › Wahlpflicht | |
| SS 2026 | Wahlpflicht für den Master RES › Wahlpflicht | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.1 Numerik und Simulation |
| WS 2025/26 | 06. Schwerpunkte › 6.1 Numerik und Simulation | |
| SS 2026 | 06. Schwerpunkte › 6.1 Numerik und Simulation | |
| Engineering Science StuPO 2007 (19.12.2007) | SS 2025 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich |
| WS 2025/26 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich |
| WS 2025/26 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| SS 2026 | 2.1 Numerik und Simulation › 2.1b Ergänzungsbereich | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.1 Numerik und Simulation |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.1 Numerik und Simulation | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.1 Numerik und Simulation | |
| Environmental Science and Technology Environmental Science and Technology (M. Sc.) - StuPO 2024 | WS 2025/26 | General Elective Specialization Environmental Science and Technology › Cross-section topics environmental engineering |
| SS 2026 | General Elective Specialization Environmental Science and Technology › Cross-section topics environmental engineering | |
| Erneuerbare Energien und Verfahrenstechnik StuPO 2025 | WS 2025/26 | Wahlpflichtbereich › Nachhaltigkeit |
| SS 2026 | Wahlpflichtbereich › Nachhaltigkeit | |
| Process Energy and Environmental Systems Engineering StuPO 2022 | SS 2025 | Wahlpflichtmodule › Environmental Engineering and Sustainability |
| WS 2025/26 | Wahlpflichtmodule › Environmental Engineering and Sustainability | |
| SS 2026 | Wahlpflichtmodule › Environmental Engineering and Sustainability | |
| Regenerative Energy Systems StuPO 2023 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration |
| WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration | |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht RES › Systeme und Integration | |
| Sustainable Energy and Process Engineering StuPO 2024 | SS 2025 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes |
| WS 2025/26 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes | |
| SS 2026 | Wahlpflichtmodule › Fachspezifische Wahlpflicht SEPE › Advanced Sustainable Processes |
Miscellaneous
Not specified