Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Automotive and Building AerodynamicsModule description #50162 / Version 2

← Module page Deutsche Fassung
Module / Version#50162 / #2
ValiditySince Summer semester 2022
Available language(s)English
Credit points6
Person responsible for the moduleNayeri, Christian Navid
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionEnglish

Affiliation

FacultyFakultät V
InstituteInstitut für Strömungsmechanik und Technische Akustik
Academic chair35311200 FG Experimentelle Strömungsmechanik

Contact

OfficeHF 1
Contact personNayeri, Christian Navid
E-mail addresschristian.nayeri@tu-berlin.de
Websitehttp://fd.tu-berlin.de/en/studies-and-courses/

Learning outcomes

This lecture provides the basics of areodynamics of bluff bodies, ground vehicles and buildings. The focus is on passenger cars. The students will be enabled to analyze and identify sources of aerodynamics forces for these objects in order to improve performance, reduce energy consumption or to incease passenger comfort. The methods include wind tunnel experiments and numerical simulation (CFD). The students will be trained in reading and summarizing scientific publications through presentations.

Content

The course deals with flows around blunt (bluff) bodies, which either move along the ground (e.g. automobiles, trucks, trains) or lie stationary in the path of a flow (e.g. buildings). The content include:

- Introduction to the aerodynamics of blunt bodies.
- Fundamental mechanisms for lift and drag of automobiles.
- Methods of reducing drag by means of lift production.
- Aspects to the design of automobiles taking into account the flow around and through the body.
- Overview of numeric and experimental methods of investigation.
- Introduction of the aerodynamics of high-speed trains
- Introduction to aerodynamics of buildings and environment

Experiments with a 25% scaled car model will be carried out in the large wind tunnel of the TU-Berlin.

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Automotive and Building AerodynamicsIntegrated course0531 L 271 Summer semester[en]4 ISIS

Workload and credit points

Automotive and Building Aerodynamics (Integrated course)

Workload descriptionMultiplierHoursTotal
Lectures154 h60 h
Preparation and follow-up, wind tunnel campagne158 h120 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The module includes lectures which provide the theoretical background of the topic. Wind tunnel experiments, scientific presentations and numerical simulations represent pratical parts.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

Fundamentals of fluid dynamics

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageEnglish

Test elements

NamePoints/WeightCategoryDuration/Extent
CFD presentation1oral
oral exam1oral
scientific presentation1practical

Exam description

oral exam

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Inscription in ISIS

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

unavailable

Recommended literature

  • Vorlesungsmitschrift W.-H. Hucho, "Aerodynamik des Automobils"
  • W.-H. Hucho, "Aerodynamik der stumpfen Körper"

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Engineering Science
StuPO 09.01.2012
SS 202506. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
WS 2025/2606. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
SS 202606. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.2 Strömungsmechanik › 2.2a Kernbereich
WS 2025/262.2 Strömungsmechanik › 2.2a Kernbereich
SS 20262.2 Strömungsmechanik › 2.2a Kernbereich
Engineering Science
StuPO 2020
SS 20252.2 Strömungsmechanik › 2.2a Kernbereich
WS 2025/262.2 Strömungsmechanik › 2.2a Kernbereich
SS 20262.2 Strömungsmechanik › 2.2a Kernbereich
WS 2026/272.2 Strömungsmechanik › 2.2a Kernbereich
Engineering Science
StuPO 2020
SS 2025Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
SS 2026Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
WS 2026/27Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik
WS 2025/26Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik
SS 2026Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik
WS 2026/27Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Strömungsmechanik
Technomathematics
Technomathematics (B. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Strömungsmechanik
WS 2025/26Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Strömungsmechanik
SS 2026Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Strömungsmechanik
WS 2026/27Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Strömungsmechanik
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified