Machine Tools IIModule description #50172 / Version 5
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v6)
| Module / Version | #50172 / #5 |
|---|---|
| Validity | Summer semester 2025 – Winter semester 2025/26 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Uhlmann, Eckart |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361100 FG Werkzeugmaschinen und Fertigungstechnik |
Contact
| Office | PTZ 1 |
|---|---|
| Contact person | Bold, Jörg |
| E-mail address | bold@iwf.tu-berlin.de |
| Website | Not specified |
Learning outcomes
By taking an in-depth look at “machine tools” for processing technical products, students should be able to analyze and evaluate holistic relationships between mechanical engineering principles and the production process. The development also includes optimization, for which knowledge of the corresponding fault complexes is necessary.
Content
Analysis and evaluation of the fault complexes: - Static, dynamic and thermal behavior - Noise behavior - Wear
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Bearbeitungssystem Werkzeugmaschine II | Lecture | 0536 L 071 | Summer semester | [de] | 2 | ISIS |
Wahlpflichtbereich
A selection of the following courses must be completed:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Bearbeitungssystem Werkzeugmaschine I | Lecture | 213 | Winter semester | [de] | 2 | WS 2026/27 (1) ISIS |
| CNC Praktikum | Exercise | Winter and summer semester | [de] | 2 | ISIS | |
| Fertigungstechnik | Lecture | 0536 L 050 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Produktionstechnisches Praktikum | Exercise | Winter and summer semester | [de] | 2 | ISIS | |
| Übungen im Versuchsfeld für Fertigungstechnik | Exercise | Winter and summer semester | [de] | 2 | WS 2026/27 (2) ISIS | |
| Übungen im Versuchsfeld für Werkzeugmaschinen | Exercise | Winter and summer semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (4)
Bearbeitungssystem Werkzeugmaschine I (Lecture) 1
- Bearbeitungssystem Werkzeugmaschine I (Vorlesung) Termingruppe 1 213
Fertigungstechnik (Lecture) 1
- Fertigungstechnik (Vorlesung) 1. Termingruppe 0536 L 050
Übungen im Versuchsfeld für Fertigungstechnik (Exercise) 2
Workload and credit points
Bearbeitungssystem Werkzeugmaschine II (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Bearbeitungssystem Werkzeugmaschine I (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
CNC Praktikum (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Fertigungstechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Produktionstechnisches Praktikum (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Übungen im Versuchsfeld für Fertigungstechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Übungen im Versuchsfeld für Werkzeugmaschinen (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Time of attendance | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 630 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The basic course is a lecture with 2 SWS, which takes place in the summer semester. Depending on the students' prerequisites, this course must be supplemented with 2 SWS from the named compulsory elective courses.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Mandatory: none Desired: basic knowledge of production technology and the structure of machine tools.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Lecture exam | 50 | written | 60 |
| Examination in the compulsory elective module | 50 | flexibel | 60 |
Exam description
The performance assessments of the lectures take place in writing at the end of the semester. The performance assessments of the practical courses take place during the semester in the form of tests or the grading of presentations. The individual parts of the module each make up 50% of the module grade.
The module is graded according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
The module is graded according to the following grading scale:
95.0 to 100.0 points ... 1,0
90.0 to 94.9 points ..... 1.3
85.0 to 89.9 points ..... 1.7
80.0 to 84.9 points ..... 2.0
75.0 to 79.9 points ..... 2.3
70.0 to 74.9 points ..... 2.7
65.0 to 69.9 points ..... 3.0
60.0 to 64.9 points ..... 3.3
55.0 to 59.9 points ..... 3.7
50.0 to 54.9 points ..... 4.0
0.0 to 49.9 points ....... 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 50.
Registration procedures
Module registration is done via ISIS.
Recommended reading, lecture notes
Lecture notes
available
Electronic lecture notes
unavailable
Recommended literature
- Hinweise in den Veranstaltungen
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2025 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik |
| WS 2025/26 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2b Produktionstechnik | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2025 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management |
| WS 2025/26 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management | |
| SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Production Technology and Factory Management | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik |
| WS 2025/26 | Wahlpflichtmodule › Kernmodule › Werkzeugmaschinen und Anlagentechnik | |
| Metals Engineering (teacher training) Metals Engineering (teacher training) (M. Ed.) - StuPO 2015 | SS 2025 | Fachwissenschaftlicher Vertiefungsbereich |
| WS 2025/26 | Fachwissenschaftlicher Vertiefungsbereich | |
| Patent Engineering StuPO 2015 | SS 2025 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik |
| WS 2025/26 | 2.1. Ingenieurwissenschaftliche Kernmodule › 2.1.7. Werkzeugmaschinen und Anlagentechnik | |
| Production Engineering StuPO 2018 (09.05.2018) | SS 2025 | 1. Kernmodule › 1.Kernmodule |
| WS 2025/26 | 1. Kernmodule › 1.Kernmodule | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
| WS 2025/26 | Studienrichtungen › Maschinenbau › Maschinenbau › Kernmodule |
The module is a core module for students on the Master's degree programme in Mechanical Engineering/Production Engineering - Specialisation in Production Technology. The module is open to all other students.
Miscellaneous
Not specified