Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Advanced Fluid DynamicsModule description #50351 / Version 3

← Module page Deutsche Fassung
Module / Version#50351 / #3
ValiditySince Winter semester 2025/26
Available language(s)English, German
Credit points6
Person responsible for the modulePaschereit, Christian Oliver
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Strömungsmechanik und Technische Akustik
Academic chair35311200 FG Experimentelle Strömungsmechanik

Contact

OfficeHF 1
Contact personPaschereit, Christian Oliver
E-mail addressstroemungslehre@fd.tu-berlin.de
Websitehttps://www.tu.berlin/fd/studium-lehre/lehrveranstaltungen

Learning outcomes

The module “Advanced Fluid Mechanics / Fluid Mechanics 2” builds on the module “Fundamentals of Fluid Mechanics / Fluid Mechanics 1.” The fundamental topics are explored in greater depth, and new fluid-mechanical phenomena are introduced so that students can broaden and deepen their physical understanding of the motion of liquids and gases.

Fluid Mechanics 1 focuses primarily on flow processes in pipe flows (e.g., based on streamline theory and the Navier-Stokes equations). Fluid Mechanics 2 expands the scope to free flows, illustrated by the flow around an airfoil.

First, the essential aspects of free flows are examined in detail (potential theory, boundary-layer flow, turbulence, etc.) and then integrated into a comprehensive flow analysis. Finally, the module covers the fundamentals of compressible flows (gas dynamics), illustrated using the Laval nozzle.

Through the thorough analysis of free flows, the module provides excellent preparation for advanced courses (e.g., automotive and building aerodynamics, aerodynamics, gas dynamics, wind turbines, fundamentals of turbulent flows, etc.).

The course conveys the following knowledge:
- Deepening of the fundamentals from Fluid Mechanics 1
- Practical engineering application areas and methods
- Mathematically rigorous foundations for flow computation
- Assessment of the functioning of applications in fluid and process engineering in advanced courses, as well as an understanding of the design methods used there

The competencies to be acquired are:
- Ability to qualitatively and quantitatively assess general fluid-mechanical problems
- Evaluation of the suitability of applied fluid-mechanical approaches and models
- Ability to identify and address fluid-mechanical sub-tasks arising from general engineering problems

Content

The module “Advanced Fluid Mechanics” analyzes key areas of free flows and concludes with the study of compressible flows:
- Potential flow (mathematical foundations, flow around a cylinder, forces, mapping to airfoils)
- Vortex flows (vortex models, vortex theorems, induced drag)
- Boundary-layer flow (Prandtl’s boundary-layer theory, boundary-layer definition, Blasius boundary layer)
- Turbulence (Reynolds equation, closure models, turbulent boundary layers)
- Flow around bodies, profiles, and wings (drag components, Kármán vortex street, wing polars)
- Compressible flows (Bernoulli equation of gas dynamics, area-velocity relation, Laval nozzle, shock waves)

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Höhere StrömungslehreLecture377 Winter and summer semester[de]2 ISIS
Höhere StrömungslehreExercise378 Winter and summer semester[de]2 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (2)

Höhere Strömungslehre (Lecture) 1

All groups of this course in the catalog

Höhere Strömungslehre (Exercise) 1

All groups of this course in the catalog

Workload and credit points

Höhere Strömungslehre (Lecture)

Workload descriptionMultiplierHoursTotal
time of attendance152 h30 h
pre-/post-class preparation154 h60 h
90 h

Höhere Strömungslehre (Exercise)

Workload descriptionMultiplierHoursTotal
time of attendance152 h30 h
pre-/post-class preparation154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

The module is conducted in separate lecture and exercise sessions. In the lecture, the instructors present the theoretical foundations, while in the exercise sessions, the topics from the lecture are discussed in greater depth through interaction between instructors and students, and solution strategies for concrete fluid-mechanical problems are developed. Supporting experiments and simulations are demonstrated and explained.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

a) Required: Fundamentals of Fluid Mechanics or equivalent

b) Recommended: Calculus II, Differential Equations, Thermodynamics

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extent45 min

Exam description

Participation in an oral examination.
Alternatively, the module Fundamentals of Fluid Mechanics may be examined together with the module Advanced Fluid Mechanics in a combined oral exam.

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration with the examination office is required.
For an oral examination (see point 8): an appointment must be arranged.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – www.fd.tu-berlin.de

Recommended literature

  • H. Schlichting und E. Truckenbrodt, "Aerodynamik des Flugzeuges", Band I, Springer Verlag
  • K. Wieghardt, "Theoretische Strömungslehre", Teubner Verlag
  • Schade / Kunz, Kameier / Paschereit: Strömungslehre, 3. Auflage, de Gruyter Verlag, 2007
  • Wille: Strömungslehre, Skript

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
WS 2025/261. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
SS 20261. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
WS 2026/271. Ingenieurwissenschaftliche Methoden › 1.3 Strömungsmechanik und Akustik
Energy Engineering and Process Engineering
StuPO 2014
WS 2025/26Wahlpflicht für den Master GES › Wahlpflicht
SS 2026Wahlpflicht für den Master GES › Wahlpflicht
WS 2026/27Wahlpflicht für den Master GES › Wahlpflicht
Engineering Science
StuPO 09.01.2012
WS 2025/2606. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule - Strömungslehre II
SS 202606. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule - Strömungslehre II
Engineering Science
StuPO 2007 (19.12.2007)
WS 2025/262.2 Strömungsmechanik › 2.2a Kernbereich (Strömungslehre)
SS 20262.2 Strömungsmechanik › 2.2a Kernbereich (Strömungslehre)
Engineering Science
StuPO 2020
WS 2025/262.2 Strömungsmechanik › 2.2a Kernbereich (Strömungslehre)
SS 20262.2 Strömungsmechanik › 2.2a Kernbereich (Strömungslehre)
WS 2026/272.2 Strömungsmechanik › 2.2a Kernbereich (Strömungslehre)
Engineering Science
StuPO 2020
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule - Strömungslehre II
SS 2026Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule - Strömungslehre II
WS 2026/27Wahlpflichtmodule › 6. Schwerpunkte › 6.2 Strömungsmechanik › Wahlpflichtmodule - Strömungslehre II
Industrial Engineering and Management
Industrial Engineering and Management (B. Sc.) - StuPO 2015
SS 2026Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht)
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen › Energie und Ressourcen (ER) › Energie und Ressourcen (Wahlpflicht)
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Maschinenbau/Mechanical Engineering (MB) › Maschinenbau/Mechanical Engineering (Wahlpflicht/Compulsory-Elective) › Fluid Mechanics
WS 2026/27Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Automotive Engineering
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2026
WS 2026/27Engineering Sciences / Specialization › Transportation Engineering › Automotive Engineering
Mechanical Engineering
StuPO 2017
SS 2026Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Strömungslehre und Thermodynamik
WS 2026/27Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Strömungslehre und Thermodynamik
Technomathematics
Technomathematics (B. Sc.) - StuPO 2014
WS 2025/26Studienrichtungen › Technisches Gebiet - Verkehrswesen › Technisch-naturwissenschaftliche Grundlagen
SS 2026Studienrichtungen › Technisches Gebiet - Verkehrswesen › Technisch-naturwissenschaftliche Grundlagen
WS 2026/27Studienrichtungen › Technisches Gebiet - Verkehrswesen › Technisch-naturwissenschaftliche Grundlagen
Transport Systems
StuPO 2018
WS 2025/26A. Grundlagen › 2. Wahlpflichtbereich › 2.2.2 Strömungslehre 2
SS 2026A. Grundlagen › 2. Wahlpflichtbereich › 2.2.2 Strömungslehre 2
WS 2026/27A. Grundlagen › 2. Wahlpflichtbereich › 2.2.2 Strömungslehre 2
Vehicle Engineering
StuPO 2017
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
SS 20262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2026/272. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
suitable for the courses Physical Engineering, Mechanical Engineering, Transportation Engineering, Industrial Engineering, and others

Miscellaneous

The course serves as a foundation for the lectures Fundamentals of Turbulent Flows, Aerodynamics, Gas Turbines and Thermoacoustics, Automotive and Building Aerodynamics, Measurement and Information Technology, and Fluid Mechanics Project.

The module Fundamentals of Fluid Mechanics may alternatively be examined together with the module Advanced Fluid Mechanics in a combined oral examination.