Methods of control engineeringModule description #50442 / Version 8
- 6 CP
- Portfolio examination
- Graded
- Summer semester
- German
| Module / Version | #50442 / #8 |
|---|---|
| Validity | Since Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Silvestre, Flavio Jose |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Luft- und Raumfahrt |
| Academic chair | 35341400 FG Flugmechanik und Flugregelung |
Contact
| Office | F 5 |
|---|---|
| Contact person | Spark, Henrik |
| E-mail address | spark@tu-berlin.de |
| Website | https://www.tu.berlin/fmra/studium-lehre/lehrveranstaltungen/methoden-der-regelungstechnik |
Learning outcomes
Knowledge of
- basic properties of dynamic systems
- mathematical methods for analysing linear differential equations
- method of linearisation
- the closed control loop
- the stability of linear, time-invariant systems
- controller design methods
- meshed control loops
Skills:
- Modelling of single and multi-variable control loops
- Control engineering analysis of the properties of linear systems
- Controller design for linear controlled systems
- Application of suitable controller structures to improve system properties
- Use of standard software for analysing controlled systems and designing controllers
Expertise:
- Critically analysing the properties of dynamic systems
- Awareness of the control engineering aspects for influencing the desired system properties
- basic properties of dynamic systems
- mathematical methods for analysing linear differential equations
- method of linearisation
- the closed control loop
- the stability of linear, time-invariant systems
- controller design methods
- meshed control loops
Skills:
- Modelling of single and multi-variable control loops
- Control engineering analysis of the properties of linear systems
- Controller design for linear controlled systems
- Application of suitable controller structures to improve system properties
- Use of standard software for analysing controlled systems and designing controllers
Expertise:
- Critically analysing the properties of dynamic systems
- Awareness of the control engineering aspects for influencing the desired system properties
Content
- Basic properties of dynamic systems
- Description of the behaviour of dynamic systems in the time domain
- Mathematical methods for analysing linear differential equations (time domain, image domain, Laplace transformation, transfer function, frequency response, linear transfer elements)
- the control loop
- Stability of linear control systems
- Specifications and methods for the design of control systems
- Root locus method
- Bode method
- Nyquist method
- Nichols diagram
- Design of control loops
- Multivariable control systems
- Matlab for analysing controlled systems and designing controllers
- Simulink for simulating controlled systems and controlled systems
- Description of the behaviour of dynamic systems in the time domain
- Mathematical methods for analysing linear differential equations (time domain, image domain, Laplace transformation, transfer function, frequency response, linear transfer elements)
- the control loop
- Stability of linear control systems
- Specifications and methods for the design of control systems
- Root locus method
- Bode method
- Nyquist method
- Nichols diagram
- Design of control loops
- Multivariable control systems
- Matlab for analysing controlled systems and designing controllers
- Simulink for simulating controlled systems and controlled systems
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Methoden der Regelungstechnik (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
Methoden der Regelungstechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance time | 15 | 2 h | 30 h |
| Preparation/follow-up | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures and exercises on the methods of control engineering are used:
Lecture:
- Presentation and examples
- Questions and discussion
Exercise:
- Homework in groups
- Exercise tasks are demonstrated
- Exercises in the PC pool (Matlab)
Lecture:
- Presentation and examples
- Questions and discussion
Exercise:
- Homework in groups
- Exercise tasks are demonstrated
- Exercises in the PC pool (Matlab)
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
- Kinematik und Dynamik,
- Analysis I für Ingenieure,
- Differential Gleichungen für Ingenieure
- Analysis I für Ingenieure,
- Differential Gleichungen für Ingenieure
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| 1st homework assignment | 10 | practical | Bearbeitungszeit ca. 5 Wochen |
| 2nd homework assignment | 15 | practical | Bearbeitungszeit ca. 7 Wochen |
| Final test (practical part) | 40 | written | 60 Minuten Bearbeitungszeit |
| Final test (theoretical part) | 30 | written | ca. 20 Minuten Bearbeitungszeit |
| Intermediate test | 5 | written | ca. 25 minutes |
Exam description
The portfolio examination consists of two homework assignments, an intermediate test and a final test consisting of a theory and calculation section.
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
As a portfolio examination via QISPOS/MTS or directly at the examination office
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – Wird auf ISIS zur Verfügung gestellt
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Aeronautics and Astronautics StuPO 2018 | WS 2025/26 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering |
| SS 2026 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| WS 2026/27 | 1. Ingenieurwissenschaftliche Methoden › 1.4 Regelungstechnik, Elektronik und Software-Engineering | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | WS 2025/26 | 4. Mess- und regelungstechnische Wahlpflichtmodule › 4.1 Regelungstechnik |
| SS 2026 | 4. Mess- und regelungstechnische Wahlpflichtmodule › 4.1 Regelungstechnik | |
| WS 2026/27 | 4. Mess- und regelungstechnische Wahlpflichtmodule › 4.1 Regelungstechnik | |
| Engineering Science StuPO 09.01.2012 | WS 2025/26 | 06. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule - Regelungstechnik |
| SS 2026 | 06. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule - Regelungstechnik | |
| Engineering Science StuPO 2020 | WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule - Regelungstechnik |
| SS 2026 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5.1 Allgemeine Grundlagen: Regelungstechnik | |
| WS 2026/27 | Wahlpflichtmodule › 4. Grundlagen Wahlpflicht › 4.5.1 Allgemeine Grundlagen: Regelungstechnik | |
| Mechanical Engineering StuPO 2017 | WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Mess- und Regelungstechnik |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Mess- und Regelungstechnik | |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Methodenorientierung › Mess- und Regelungstechnik | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik |
| SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Luft- und Raumfahrttechnik | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | WS 2025/26 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Luft- und Raumfahrttechnik |
| SS 2026 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Luft- und Raumfahrttechnik | |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Luft- und Raumfahrttechnik | |
| Transport Systems StuPO 2018 | WS 2025/26 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
| SS 2026 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich | |
| WS 2026/27 | B. Studienrichtungen › Luft- und Raumfahrttechnik › 4. Vertiefungs- und Anwendungsbereich |
geeignete Studienrichtung:
- Bachelor Verkehrswesen (Studienrichtung: Luft- und Raumfahrttechnik)
- Physikalische Ingenieurwissenschaften
geeigneter Studienschwerpunkt (BSc Verkehrswesen: Luft- und Raumfahrttechnik):
- Luftfahrttechnik
- Luftverkehr
- Raumfahrttechnik
Grundlage für:
- Flugmechanik III (Flugeigenschaften der Längs und Seitenbewegung),
- Flugregelung
Hilfreich bei:
- Experimentelle Flugmechanik,
- Flugsimulationstechnik.
- Bachelor Verkehrswesen (Studienrichtung: Luft- und Raumfahrttechnik)
- Physikalische Ingenieurwissenschaften
geeigneter Studienschwerpunkt (BSc Verkehrswesen: Luft- und Raumfahrttechnik):
- Luftfahrttechnik
- Luftverkehr
- Raumfahrttechnik
Grundlage für:
- Flugmechanik III (Flugeigenschaften der Längs und Seitenbewegung),
- Flugregelung
Hilfreich bei:
- Experimentelle Flugmechanik,
- Flugsimulationstechnik.
Miscellaneous
Not specified