Drive and Brake Technology of Rail VehiclesModule description #50555 / Version 7
- 6 CP
- Written exam
- Graded
- Summer semester
- German
| Module / Version | #50555 / #7 |
|---|---|
| Validity | Since Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Bender, Beate |
| Grading | Graded |
| Exam format | Written exam |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Not specified |
| Academic chair | Not specified |
Contact
| Office | SG 14 |
|---|---|
| Contact person | Zarabi-Grittke, Lisa Noelle |
| E-mail address | l.zarabi-grittke@tu-berlin.de |
| Website | https://www.tu.berlin/schienenfzg/studium-lehre/lehre |
Learning outcomes
Students are shown the complex interrelationships in the railroad system. They are enabled to work on issues relating to driving dynamics in relation to the overall system. The independent processing and solving of problems is encouraged through exercises.
Content
In the module Drive and Brake Technology of Rail Vehicles, the realization of the drive of rail vehicles is considered. Both the design implementation and the effects on driving dynamics are discussed. Another focus of the module is on the brakes used in rail transportation and their special features. The effects on longitudinal dynamics as well as shunting technology are dealt with in depth.
The following topics are covered in more detail:
- Tractive force-speed diagram
- Running resistances
- Wheel-rail contact, adhesion values
- Rail vehicle drives
- Train buffers: Buffers, screw couplers, automatic couplers
- Passenger changeover times
- Shunting technology, handling of freight wagons, auxiliary equipment in large shunting yards (track brakes, radio-controlled locomotives)
- Electronic systems: telematics and diagnostics, locating systems, measuring and evaluation systems, vehicle bus, train bus, derailment detector;
- Brake, brake types, design, minimum brake centroids, friction values Block materials, wheel slide protection
- Modular design of components, electronic control; mechanical brake components: Block, disk brake, rail brakes, longitudinal dynamics
The following topics are covered in more detail:
- Tractive force-speed diagram
- Running resistances
- Wheel-rail contact, adhesion values
- Rail vehicle drives
- Train buffers: Buffers, screw couplers, automatic couplers
- Passenger changeover times
- Shunting technology, handling of freight wagons, auxiliary equipment in large shunting yards (track brakes, radio-controlled locomotives)
- Electronic systems: telematics and diagnostics, locating systems, measuring and evaluation systems, vehicle bus, train bus, derailment detector;
- Brake, brake types, design, minimum brake centroids, friction values Block materials, wheel slide protection
- Modular design of components, electronic control; mechanical brake components: Block, disk brake, rail brakes, longitudinal dynamics
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Antriebs- und Bremstechnik von Schienenfahrzeugen (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
Antriebs- und Bremstechnik von Schienenfahrzeugen (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| Pre/post processing | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
The course content is taught through lectures and exercises. The exercises provide more in-depth coverage of the topics covered in the lectures.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
Introduction to rail vehicle technology, design and structure of rail vehicles, fundamentals of technical mechanics and design engineering
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Written exam |
| Language | German |
| Duration/Extent | 90 min |
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
No later than 6 weeks after the start of the module on MOSES
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – In Lecture
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Automotive Engineering (teacher training) Kernfach StuPO 2016 | SS 2026 | Fachwissenschaftlicher Vertiefungsbereich |
| WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich | |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Kernfach StuPO 2020 | SS 2026 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| Automotive Engineering (teacher training) Zweitfach StuPO 2016 | SS 2026 | Fachwissenschaftlicher Vertiefungsbereich |
| WS 2026/27 | Fachwissenschaftlicher Vertiefungsbereich | |
| Automotive Engineering (teacher training) Automotive Engineering (teacher training) (B. Sc.) - Zweitfach StuPO 2020 | SS 2026 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich |
| WS 2026/27 | Wahlpflichtbereich › Fachwissenschaftlicher Wahlpflichtbereich | |
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 (17.01.2018) | SS 2026 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer |
| WS 2026/27 | 4. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2c Produktorientierte Fächer | |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2026 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen › Verkehrswesen (VW) › Verkehrswesen (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2026 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Railway Engineering |
| WS 2026/27 | Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Verkehrswesen/Transportation Engineering (VW) › Verkehrswesen/Transportation Engineering (Wahlpflicht/Compulsory-Elective) › Railway Engineering | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2026 | WS 2026/27 | Engineering Sciences / Specialization › Transportation Engineering › Railway Engineering |
| Mechanical Engineering StuPO 2017 | SS 2026 | Wahlpflichtmodule › Profilmodule › Produkte |
| WS 2026/27 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Patent Engineering StuPO 2015 | SS 2026 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte |
| WS 2026/27 | 2.2. Ingenieurwissenschaftliche Profilmodule › 2.2.3. Produkte | |
| Technomathematics Technomathematics (M. Sc.) - StuPO 2014 | SS 2026 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik |
| WS 2026/27 | Studienrichtungen › Verkehrswesen › Verkehrswesen › Fahrzeugtechnik | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2026 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Verkehrswesen › Studienrichtung › Fahrzeugtechnik | |
| Transport Systems StuPO 2018 | SS 2026 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich |
| WS 2026/27 | B. Studienrichtungen › Fahrzeugtechnik › 4. Vertiefungs- und Anwendungsbereich | |
| Vehicle Engineering StuPO 2017 | SS 2026 | 2. Profilmodule › 2.1 Schienenfahrzeugtechnik |
| WS 2026/27 | 2. Profilmodule › 2.1 Schienenfahrzeugtechnik |
This module is particularly recommended for students studying automotive engineering. Furthermore, students studying planning and operations can focus on rail transport with an automotive engineering background. Additional options from the fields of mechanical engineering and industrial engineering are also possible. This module forms the basis for the following modules: Dynamics of Rail Vehicles
Miscellaneous
Not specified