Engineering Design 1 - Konstruktionslehre 1Module description #50680 / Version 7
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v8)
| Module / Version | #50680 / #7 |
|---|---|
| Validity | Summer semester 2025 – Summer semester 2026 |
| Available language(s) | English, German |
| Credit points | 6 |
| Person responsible for the module | Meyer, Henning |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Maschinenkonstruktion und Systemtechnik (IMS) |
| Academic chair | 35351300 FG Konstruktion von Maschinensystemen |
Contact
| Office | W 1 |
|---|---|
| Contact person | Meyer, Henning |
| E-mail address | henning.meyer@tu-berlin.de |
| Website | https://www.tu.berlin/go53463/ |
Learning outcomes
Students acquire knowledge of:
- machine elements from the areas of shaft-hub connections, rolling bearings, driver connections
- the procedure and process of strength calculations
Students acquire the following skills:
- Application of engineering procedures and basic knowledge of working techniques for the development of simple designs
- Implement various fundamentals of strength theory and statics for the methodical calculation of components and machine elements
- Understanding of load types and selection and application of various calculation methods to determine the service life or strength of components or machine elements
Students acquire the following skills:
- Ability to analyze and solve simple technical tasks
- Ability to assess the use of machine elements in constructions
Translated with DeepL.com (free version)
- machine elements from the areas of shaft-hub connections, rolling bearings, driver connections
- the procedure and process of strength calculations
Students acquire the following skills:
- Application of engineering procedures and basic knowledge of working techniques for the development of simple designs
- Implement various fundamentals of strength theory and statics for the methodical calculation of components and machine elements
- Understanding of load types and selection and application of various calculation methods to determine the service life or strength of components or machine elements
Students acquire the following skills:
- Ability to analyze and solve simple technical tasks
- Ability to assess the use of machine elements in constructions
Translated with DeepL.com (free version)
Content
Lecture:
- Fundamentals of design and dimensioning according to stress and material as well as functional and production-oriented design
- Application and design of positive and frictional shaft-hub connections
- Possibilities and design of bearings for rotating components
- Joining techniques
- Proof of strength
- Functional design of shafts
Integrated event:
- Design of simple structures suitable for welding, casting and bending
- Systematic procedure for determining loads and stresses in components
- Determination of loads and selection of positive and frictional shaft-hub connections to transfer and conduct these loads
- Selection of rolling bearings to achieve a defined service life
- Determination and assessment of static safety factors of shafts and their functional design
Translated with DeepL.com (free version)
- Fundamentals of design and dimensioning according to stress and material as well as functional and production-oriented design
- Application and design of positive and frictional shaft-hub connections
- Possibilities and design of bearings for rotating components
- Joining techniques
- Proof of strength
- Functional design of shafts
Integrated event:
- Design of simple structures suitable for welding, casting and bending
- Systematic procedure for determining loads and stresses in components
- Determination of loads and selection of positive and frictional shaft-hub connections to transfer and conduct these loads
- Selection of rolling bearings to achieve a defined service life
- Determination and assessment of static safety factors of shafts and their functional design
Translated with DeepL.com (free version)
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Konstruktionslehre 1 | Lecture | 3535 L 040 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Konstruktionslehre 1 | Integrated course | 3535 L 041 | Winter and summer semester | [de] | 2 | WS 2026/27 (10) ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (11)
Konstruktionslehre 1 (Lecture) 1
- Konstruktionslehre 1 (Vorlesung) Termingruppe 1 3535 L 040
Konstruktionslehre 1 (Integrated course) 10
- Konstruktionslehre 1 (Integrierte Veranstaltung) Di. 20.10 - 15.12.26, wöchentlich, Di. 05.01 - 19.01.27, wöchentlich, 10:00 - 12:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Do. 22.10 - 17.12.26, wöchentlich, Do. 07.01 - 21.01.27, wöchentlich, 14:00 - 16:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Mi. 21.10 - 16.12.26, wöchentlich, Mi. 06.01 - 20.01.27, wöchentlich, 12:00 - 14:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Mi. 21.10 - 16.12.26, wöchentlich, Mi. 06.01 - 20.01.27, wöchentlich, 14:00 - 16:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Mo. 19.10 - 14.12.26, wöchentlich, Mo. 11.01.27, Mo. 18.01.27, 10:00 - 12:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Mo. 19.10 - 14.12.26, wöchentlich, Mo. 11.01.27, Mo. 18.01.27, 12:00 - 14:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Mo. 19.10 - 14.12.26, wöchentlich, Mo. 11.01.27, Mo. 18.01.27, 14:00 - 16:00 Charlottenburg, W 212 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Termingruppe 2 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Termingruppe 5 3535 L 041
- Konstruktionslehre 1 (Integrierte Veranstaltung) Warteliste 3535 L 041
Workload and credit points
Konstruktionslehre 1 (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| 30 h | |||
Konstruktionslehre 1 (Integrated course)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Attendance | 15 | 2 h | 30 h |
| 30 h | |||
Course-independent workload
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Homework | 15 | 4 h | 60 h |
| Pre/post-processing / Supervised construction time | 1 | 30 h | 30 h |
| Preparation for the test | 1 | 30 h | 30 h |
| 120 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lectures, tutorials and independent work are used.
Lecture:
- Event in a large group to convey the teaching content and contexts as frontal teaching with many practical examples
Integrated event:
- Presentation of calculations and methods on the respective topics
- Events in a supervised small group with the involvement of students in the exercises
- Calculations, examples and exercises in small groups to consolidate and apply the lecture material
Homework in individual work:
- Carrying out calculation and construction tasks
Translated with DeepL.com (free version)
Lecture:
- Event in a large group to convey the teaching content and contexts as frontal teaching with many practical examples
Integrated event:
- Presentation of calculations and methods on the respective topics
- Events in a supervised small group with the involvement of students in the exercises
- Calculations, examples and exercises in small groups to consolidate and apply the lecture material
Homework in individual work:
- Carrying out calculation and construction tasks
Translated with DeepL.com (free version)
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
It is recommended that students have completed or have already completed the module Statics and Mechanics of Materials as well as a completed basic internship in a metalworking industrial company, basic knowledge of materials science and manufacturing technology.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Homework | 30 | written | 60 h |
| Test (ISIS) | 70 | flexibel | 60 min |
Exam description
100 portfolio points can be achieved in this module.
The acquired portfolio points are converted into grades according to the following grading scale:
more than or equal to 95 portfolio points, grade 1.0
more than or equal to 90 portfolio points, grade 1.3
more than or equal to 85 portfolio points, grade 1.7
more than or equal to 80 portfolio points, grade 2.0
more than or equal to 75 portfolio points, grade 2.3
more than or equal to 70 portfolio points, grade 2.7
more than or equal to 65 portfolio points, grade 3.0
more than or equal to 60 portfolio points, grade 3.3
more than or equal to 55 portfolio points, grade 3.7
more than or equal to 50 portfolio points, grade 4.0
less than 50 portfolio points, grade 5.0
The acquired portfolio points are converted into grades according to the following grading scale:
more than or equal to 95 portfolio points, grade 1.0
more than or equal to 90 portfolio points, grade 1.3
more than or equal to 85 portfolio points, grade 1.7
more than or equal to 80 portfolio points, grade 2.0
more than or equal to 75 portfolio points, grade 2.3
more than or equal to 70 portfolio points, grade 2.7
more than or equal to 65 portfolio points, grade 3.0
more than or equal to 60 portfolio points, grade 3.3
more than or equal to 55 portfolio points, grade 3.7
more than or equal to 50 portfolio points, grade 4.0
less than 50 portfolio points, grade 5.0
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
This module is not limited to a number of students.
Registration procedures
Central online registration from the beginning of the semester (1.10. or 1.4.) via the MOSES system for tutorials.
Registration and deregistration for module examinations via the MOSES system up to one day before the first examination.
Registration and deregistration for module examinations via the MOSES system up to one day before the first examination.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – www.isis.tu-berlin.de
Recommended literature
- Decker: Maschinenelemente. Hanser Fachbuchverlag
- Dubbel: Taschenbuch für den Maschinenbau. Springer Verlag
- Haberhauer, Bodenstein: Maschinenelemente. Springer Verlag
- Hoischen: Technisches Zeichnen. Cornelsen Verlag
- Labisch, Wählisch: Technisches Zeichnen
- Roloff, Matek: Maschinenelemente. Vieweg Verlag
- Schlecht: Maschinenelemente. Pearson Studium
- Ulrich et al.: Tabellenbuch Metall. Europa Lehrmittel
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 2. Technische und naturwissenschaftliche Grundlagen |
| WS 2025/26 | 2. Technische und naturwissenschaftliche Grundlagen | |
| SS 2026 | 2. Technische und naturwissenschaftliche Grundlagen | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 02. Technisch-methodische Grundlagen › Pflichtmodule |
| WS 2025/26 | 02. Technisch-methodische Grundlagen › Pflichtmodule | |
| SS 2026 | 02. Technisch-methodische Grundlagen › Pflichtmodule | |
| Engineering Science StuPO 2020 | SS 2025 | Pflichtmodule › 2. Technisch-methodische Grundlagen |
| WS 2025/26 | Pflichtmodule › 2. Technisch-methodische Grundlagen | |
| SS 2026 | Pflichtmodule › 2. Technisch-methodische Grundlagen | |
| MINTgruen pre-study orientation program MINTgruen pre-study orientation program (OS.) - Studienaufbau MINTgrün | SS 2025 | Wahlpflicht MINT › Module aus der Technik |
| WS 2025/26 | Wahlpflicht MINT › Module aus der Technik | |
| SS 2026 | Wahlpflicht MINT › Module aus der Technik | |
| Mechanical Engineering StuPO 2017 | SS 2025 | Pflichtbereich › Technische Grundlagen |
| WS 2025/26 | Pflichtbereich › Technische Grundlagen | |
| SS 2026 | Pflichtbereich › Technische Grundlagen | |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 1. Pflichtbereich › 1.3 Technisch-methodische Grundlagen |
| WS 2025/26 | A. Grundlagen › 1. Pflichtbereich › 1.3 Technisch-methodische Grundlagen | |
| SS 2026 | A. Grundlagen › 1. Pflichtbereich › 1.3 Technisch-methodische Grundlagen |
Miscellaneous
Not specified