Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Technical Research and Innovation in Student Exoskeleton development (RISE) IModule description #51022 / Version 3

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v4)
Module / Version#51022 / #3
ValiditySummer semester 2025 – Summer semester 2026
Available language(s)English, German
Credit points6
Person responsible for the moduleSchneidewind, Lukas Julius
GradingGraded
Exam formatPortfolio examination
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Maschinenkonstruktion und Systemtechnik (IMS)
Academic chair35351600 FG Medizintechnik

Contact

OfficeSG 11
Contact personSchneidewind, Lukas Julius
E-mail addressmedtech-TB-lehre@win.tu-berlin.de
Websitehttp://www.medtech.tu-berlin.de/menue/studium_und_lehre/module/

Learning outcomes

Participants acquire in-depth knowledge in the thematic area of their group upon successful completion. They apply part of the theoretical content covered during their studies to practical technical challenges.

Furthermore, participants gain skills in methodical functional analysis and conceptualization, documentation using standardized knowledge management systems, interdisciplinary collaboration with groups from other fields, and agile project management methods - exemplified by an exoskeleton subsystem.

This module is conducted in close collaboration with other technical and non-technical RISE modules.

Content

The tasks of the participants in the module range from research, conceptualization, simulation, and design to manufacturing, assembly, testing, and documentation of the functional exoskeleton. Depending on their chosen focus, participants acquire advanced skills in areas such as:

- Design with Siemens NX,
- Actuators and electric motors,
- Additive manufacturing,
- Electronics development with KiCAD,
- Practical fields of electrical engineering (soldering, crimping, measuring, etc.),
- Battery technology and power electronics,
- Control engineering for actuators and balance control,
- Software development with ROS2 "Humble," Python, and C++,
- Industrial bus systems such as EtherCAT,
- Sensor implementation, data acquisition, and analysis,
- Simulation and analysis of biomechanical processes,
- and many other fields.

Participants can practically apply the theoretical knowledge acquired during their previous studies. With structured support from tutors, they independently carry out development tasks in groups and present their results.

In addition, they gain insights into the organization of an interdisciplinary development project and the application of agile project management methods (SCRUM).

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Studentische Exoskelettentwicklung für IngenieurInnen I (RISE)Integrated course3535 L 11709 Winter and summer semester[de]4 ISIS

Courses in the course catalog

Courses created from the teaching units of this module.

Winter semester 2026/27 (1)

Studentische Exoskelettentwicklung für IngenieurInnen I (RISE) (Integrated course) 1

All groups of this course in the catalog

Workload and credit points

Studentische Exoskelettentwicklung für IngenieurInnen I (RISE) (Integrated course)

Workload descriptionMultiplierHoursTotal
Attendance154 h60 h
Pre/post processing158 h120 h
180 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

As part of the module, participants develop components of an exoskeleton for paraplegics through practical project work. Based on their interests, skills, and prior experience, participants work in groups to systematically develop and implement their own concepts. The groups are organized thematically and focus on areas such as design, (power) electronics, control engineering, software development, and human-machine interaction.

Throughout the semester-long project work, regular presentations take place where project supervisors and, if applicable, external participants provide guidance and feedback on the next steps.

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

The technical challenges that arise during the further development of the exoskeleton are often based on the current state of the art. Accordingly, advanced knowledge in one or more of the aforementioned areas is desirable but not strictly required.

Depending on the knowledge level of each group, tasks may range from more complex to less complex.

In general, a willingness to work independently and collaboratively in groups is highly desirable.

Mandatory requirements for the module examination registration:

This module has no examination requirements.

Completion of the module

GradingGraded
Exam formatPortfolio examination
Type of portfolio examination100 points in total
LanguageGerman

Test elements

NamePoints/WeightCategoryDuration/Extent
Midterm presentation30oral5 minutes per participant
Final presentation30oral5 minutes per participant
Documentation as a written report40written5-10 pages per group member

Exam description

Hier ist die englische Übersetzung:

In the module, up to 100 portfolio points can be achieved. The conversion to grades is carried out according to the selected grading scale.

Each individual component can earn up to 100 points, which are weighted as follows in the overall score:

Interim presentation - 30% of the total points
Final presentation - 30% of the total points
Technical documentation as a written report - 40% of the total grade

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Winter and summer semester.

Maximum number of participants

This module is not limited to a number of students.

Registration procedures

Registration for the course takes place via ISIS and must be completed during the first week of lectures.

Additionally, registration for the exam via MTS is required after group assignments have been finalized.

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available

Recommended literature

  • Pahl/Beitz: Konstruktionslehre: Grundlagen erfolgreicher Produktentwicklung Methoden und Anwendung, Verlag: Springer, Jahr: 2005
  • J. Perry: Ganganalyse : Norm und Pathologie des Gehens, 1. Aufl. München, Verlag: Urban & Fischer, Jahr: 2003

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Biomedical Engineering
StuPO 2018
SS 20252. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
WS 2025/262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
SS 20262. Wahlpflichtmodule › 2.2 Ingenieurwissenschaftliche Vertiefungen
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
SS 20256. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
WS 2025/266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
SS 20266. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.1 Konstruktion und Gestaltung
Computer Engineering
Computer Engineering (B. Sc.) - StuPO 2015
SS 2025Wahlpflichtbereich › Automatisierungstechnik
WS 2025/26Wahlpflichtbereich › Automatisierungstechnik
SS 2026Wahlpflichtbereich › Automatisierungstechnik
Computer Engineering
Computer Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
WS 2025/26Wahlpflicht Studiengebiet B › Medientechnik und Mensch-Maschine-Interaktion / Digital Media und Human-Computer Interaction
SS 2026Wahlpflicht Studiengebiet B › Medientechnik und Mensch-Maschine-Interaktion / Digital Media und Human-Computer Interaction
Computer Science (Informatik)
Computer Science (Informatik) (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Medientechnik und Mensch-Maschine-Interaktion / Digital Media and Human-Computer Interaction
WS 2025/26Studiengebiete › Medientechnik und Mensch-Maschine-Interaktion / Digital Media und Human-Computer Interaction
SS 2026Studiengebiete › Medientechnik und Mensch-Maschine-Interaktion / Digital Media und Human-Computer Interaction
Electrical Engineering
Electrical Engineering (M. Sc.) - StuPO 2015
SS 2025Wahlpflicht Studiengebiete Fak. IV › Medientechnik und Mensch-Maschine-Interaktion / Digital Media and Human-Computer Interaction
WS 2025/26Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
SS 2026Wahlpflicht Studiengebiete Fak. IV › Automatisierungstechnik / Automation and Control
Engineering Science
StuPO 09.01.2012
SS 202506. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
WS 2025/2606. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
SS 202606. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
Engineering Science
StuPO 2007 (19.12.2007)
SS 20253. Projektmodule
WS 2025/262.3 Mechatronik › 2.3b Ergänzungsbereich
SS 20263. Projektmodule
Engineering Science
StuPO 2020
SS 20253. Projektmodule
WS 2025/263. Projektmodule
SS 20263. Projektmodule
Engineering Science
StuPO 2020
SS 2025Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
SS 2026Wahlpflichtmodule › 6. Schwerpunkte › 6.3 Mechatronik › Wahlpflichtmodule
Industrial Engineering and Management
Industrial Engineering and Management (M. Sc.) - StuPO 2015
SS 2025Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective)
WS 2025/26Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective)
SS 2026Ingenieurwissenschaftliche Studienrichtungen/Engineering Majors › Gesundheitstechnik/Healthcare Technology (GT) › Gesundheitstechnik/Healthcare Technology (Wahlpflicht/Compulsory-Elective)
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik
WS 2025/26Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik
SS 2026Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Medizintechnik
Mechanical Engineering
StuPO 2017
SS 2025Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2025/26Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2026Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
Patent Engineering
StuPO 2015
SS 20252.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
WS 2025/262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung
SS 20262.2. Ingenieurwissenschaftliche Profilmodule › 2.2.2. Informationstechnische und rechnergestützte Modellierung

Miscellaneous

The module has a strong project-based character and, therefore, involves close collaboration between the teams as well as with individual thesis and project work, which can also be integrated within the scope of RISE.