Skip to content
Technische Universität Berlin Deutsch
Course catalog and module transfer system

Structural MechanicsModule description #51190 / Version 1

← Module page Deutsche Fassung
This module description is not valid in the current semester (Winter semester 2026/27). Current version (v2)
Module / Version#51190 / #1
ValidityWinter semester 2023/24 – Winter semester 2025/26
Available language(s)German
Credit points6
Person responsible for the moduleKlinge, Sandra
GradingGraded
Exam formatOral exam
Language(s) of instructionGerman

Affiliation

FacultyFakultät V
InstituteInstitut für Mechanik
Academic chair35371300 FG Mechanik, insbes. Strukturmechanik

Contact

OfficeC 8-3
Contact personHapp, Anke
E-mail addressanke.happ@tu-berlin.de
Websitehttps://www.smb.tu-berlin.de/menue/studium_und_lehre/hoehere_mechanik/strukturmechanik_i_und_ii/

Learning outcomes

Knowledge:
- Fundamentals of stress-oriented design (pre-development, design phase, usual verifications)
- on structural idealisation in modelling
- on energy principles as a basis for numerical methods
- about some numerical methods
- on the evaluation of the structural behaviour of thin-walled structures including the stability of structures
- on the fundamentals of dynamic structural behaviour

Skills:
- appropriate modelling of thin-walled structures
- Evaluation of complex numerical solutions through knowledge of "classical" structural modelling for thin-walled structures
- Calculation of structures modelled with plates and membrane shells
- Numerical solution of strength and stability problems

Content

- Stress tensor, distortion tensor, principal stresses, 3D equilibrium equations, plane stress state, plane distortion state.
- Fundamentals of modelling for the design calculation and analysis of thin-walled structures - Lightweight structures for aerospace engineering, vehicle construction, shipbuilding and maritime engineering, mechanical engineering, materials handling technology, steel construction.
aerospace engineering, vehicle construction, ship and marine engineering, mechanical engineering, materials handling, steel construction and production engineering
- Thin-walled structures - beam structures, trusses, bending of thin plates, membrane shells,
- Application of energy principles, the principle of virtual work, equilibrium consideration with the minimum principle of elastic potential, deformation and supplementary work of elastic structures and application of the
1st and 2nd theorem of Castigliano
- Fundamentals of numerical methods for solving strength and stability problems - Ritz method, FEM
- Stability problem, understanding and definition of the problem, pre-stress effects
- Basic problems of structural dynamics - modal analysis, structural damping, transient structural response

Module components

Compulsory area

The following courses are mandatory for this module:

CoursesTypeNumberFrequencyLanguageHours per weekCourse catalog
Strukturmechanik IILecture0530 L 277 Summer semester[de]2 ISIS
Strukturmechanik IIExercise0530 L 278 Summer semester[de]2 ISIS

Workload and credit points

Strukturmechanik II (Lecture)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

Strukturmechanik II (Exercise)

Workload descriptionMultiplierHoursTotal
Präsenzzeit152 h30 h
Vor-/Nachbereitung154 h60 h
90 h

The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.

Description of teaching and learning methods

Lecture with examples and programme applications,
detailed calculation examples in the exercise,

Requirements for participation and examination

Desirable prerequisites for participation in the courses:

This module has no desirable prerequisites for the courses.

Mandatory requirements for the module examination registration:

The examination requirements could not be retrieved.

Completion of the module

GradingGraded
Exam formatOral exam
LanguageGerman
Duration/Extentca. 30 Min.

Exam description

mündliche Prüfung

Duration of the module

The following number of semesters is estimated for taking and completing the module: 1 semester(s).

This module can be started in the following semesters: Summer semester.

Maximum number of participants

The maximum capacity of participants is 100.

Registration procedures

no registration formalities

Recommended reading, lecture notes

Lecture notes

unavailable

Electronic lecture notes

available – ISIS

Recommended literature

  • C.F. Kollbrunner / M. Meister: Knicken, Biegedrillknicken, Kippen. Springer-Verlag, 1961
  • D. Gross / W. Hauger / W. Schnell / P. Wriggers: Technische Mechanik 4. Springer, 2004
  • H. Göldner: Lehrbuch Höhere Festigkeitslehre. Band 1. Fachbuchverlag Leipzig. 1991
  • H. Göldner: Lehrbuch Höhere Festigkeitslehre. Band 2. Fachbuchverlag Leipzig-Köln. 1992
  • N.A. Alfutov: Stability of Elastic Structures. Springer, 2004

Assigned programs

This module version is used in the following programs:

Program / program versionSemester(s)Curriculum component
Aeronautics and Astronautics
StuPO 2018
SS 20253. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau
WS 2025/263. Profilmodule › 3.2 Luftfahrzeugbau und Leichtbau
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018
SS 20255. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.2 Mechanik
WS 2025/265. Ingenieurwissenschaftliche Wahlpflichtmodule › 5.2 Mechanik
Computational Engineering Science (Informationstechnik im Maschinenwesen)
StuPO 2018 (17.01.2018)
SS 20254. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
WS 2025/264. Profilbereich › 4.2 Profilbereich: Konstruktion und Fertigung › 4.2a Konstruktion und Gestaltung
Engineering Science
StuPO 09.01.2012
SS 202506. Schwerpunkte › 6.4 Festkörpermechanik
WS 2025/2606. Schwerpunkte › 6.4 Festkörpermechanik
Engineering Science
StuPO 2007 (19.12.2007)
SS 20252.4 Festkörpermechanik › 2.4a Kernbereich
WS 2025/262.4 Festkörpermechanik › 2.4a Kernbereich
Engineering Science
StuPO 2020
SS 20252.4 Festkörpermechanik › 2.4a Kernbereich
WS 2025/262.4 Festkörpermechanik › 2.4a Kernbereich
Engineering Science
StuPO 2020
SS 2025Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik
WS 2025/26Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik
Mechanical Engineering
StuPO 2017
WS 2023/24Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2024Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2024/25Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
SS 2025Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
WS 2025/26Wahlpflichtmodule › Profilmodule › Informationstechnische und rechnergestützte Modellierung
Naval Architecture and Ocean Engineering
StuPo 2017
SS 20251. Kernmodule › 1.3 Strukturanalyse
WS 2025/261. Kernmodule › 1.3 Strukturanalyse
Technomathematics
Technomathematics (M. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik
WS 2025/26Studienrichtungen › Physikalische Ingenieurwissenschaft › Physikalische Ingenieurwissenschaft › Festkörpermechanik
Technomathematics
Technomathematics (B. Sc.) - StuPO 2014
SS 2025Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Festkörpermechanik
WS 2025/26Studienrichtungen › Technisches Gebiet - Physikalische Ingenieurwissenschaft › Schwerpunkt › Festkörpermechanik
Vehicle Engineering
StuPO 2017
SS 20252. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden
WS 2025/262. Profilmodule › 2.3 Ingenieurtechnische Grundlagen und Methoden

Miscellaneous

Not specified