Strategic StandardizationModule description #70236 / Version 6
- 6 CP
- Portfolio examination
- Graded
- Winter and summer semester
- German
This module description is not valid in the current semester (Winter semester 2026/27).
Current version (v7)
| Module / Version | #70236 / #6 |
|---|---|
| Validity | Summer semester 2023 – Summer semester 2025 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Blind, Knut |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät VII |
|---|---|
| Institute | Institut für Technologie und Management |
| Academic chair | 37335100 FG S-Professur Innovationsökonomie |
Contact
| Office | H 47 |
|---|---|
| Contact person | Essoun, Brigitte |
| E-mail address | knut.blind@tu-berlin.de |
| Website | https://www.tu.berlin/inno |
Learning outcomes
Standards and standardisation are ubiquitous. Successful examples are mobile telephones, which rapid diffusion benefited in Europe by the timely release of the GSM standard, and laser technology, for which the German industry achieved via early standardisation a leading position both in Europe and worldwide.
Some of these standards we are aware of like standardised paper sizes, standards in the www, plugs and sockets of electronic equipment, bolts matching nuts etc.. Other standards we may not be aware of like standards for the height of steps on a flight of stairs or standards for the safety of playground equipment.
Even though we might not be aware of all types of standards they both have an impact on our modern life and at the same time are important tools of strategical entrepreneurship as well as relevant for industry at large, policy and society.
Some of these standards we are aware of like standardised paper sizes, standards in the www, plugs and sockets of electronic equipment, bolts matching nuts etc.. Other standards we may not be aware of like standards for the height of steps on a flight of stairs or standards for the safety of playground equipment.
Even though we might not be aware of all types of standards they both have an impact on our modern life and at the same time are important tools of strategical entrepreneurship as well as relevant for industry at large, policy and society.
Content
1. Introduction to the importance of standardization as a strategic instrument.
2. National standardization process and participation oportunities
3. European standardization
4. International standardization
5. Cooperation of the standardization levels
6. Research and development - innovations with standards and specifications
7. General protection goals - responsibilities towards society and the environment
8. Standardization as a strategic instrument - contract security and state relief
9. Product conformity and CE marking - company processes and conformity assessment
10. Benefits of standards - entrepreneurship and macroeconomic considerations
2. National standardization process and participation oportunities
3. European standardization
4. International standardization
5. Cooperation of the standardization levels
6. Research and development - innovations with standards and specifications
7. General protection goals - responsibilities towards society and the environment
8. Standardization as a strategic instrument - contract security and state relief
9. Product conformity and CE marking - company processes and conformity assessment
10. Benefits of standards - entrepreneurship and macroeconomic considerations
Module components
Compulsory area
The following courses are mandatory for this module:
| Courses | Type | Number | Frequency | Language | Hours per week | Course catalog |
|---|---|---|---|---|---|---|
| Strategische Normung | Lecture | 73 510 L 283 | Winter and summer semester | [de] | 2 | WS 2026/27 (1) ISIS |
| Strategische Normung | Exercise | 73 510 L 1474 | Winter and summer semester | [de] | 2 | ISIS |
Courses in the course catalog
Courses created from the teaching units of this module.
Winter semester 2026/27 (1)
Strategische Normung (Lecture) 1
- Strategische Normung (Vorlesung) 1. Termingruppe 73 510 L 283
Workload and credit points
Strategische Normung (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Class attendance | 15 | 2 h | 30 h |
| Exam preparation | 1 | 30 h | 30 h |
| Class preparation and follow-up | 15 | 2 h | 30 h |
| 90 h | |||
Strategische Normung (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Reports | 1 | 30 h | 30 h |
| Class attendance | 15 | 2 h | 30 h |
| Class preparation and follow-up | 15 | 2 h | 30 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Guests from the private sector, science, government and the DIN Group will participate in selected lecture dates and contribute additional practical experience and perspectives. The exercise sessions cover the participation in two committee meetings with free choice of dates and topics as well as participation in a simulated committee meeting.
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
An accompanying attendance of other modules related to the field of innovation economics or/and innovation policy is recommended if necessary.
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| 1 report for a DIN-board session (Gremiensitzung) | 20 | written | 5-10 pages |
| 1 report for a DIN-board session (Gremiensitzung) | 20 | written | 5-10 Seiten |
| Exam | 60 | written | 60 Min |
Exam description
The portfolio examination consists of the following elements, in which a maximum of 100 points can be achieved in total. Grading is done according to the common grading system of Faculty VII (resolution of the Faculty Council dated 28.05.2014 - FKR VII-4/8-28.05.2014).
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter and summer semester.
Maximum number of participants
The maximum capacity of participants is 100.
Registration procedures
Registration for the exercise courses "Strategic Standardization" takes place during the first three weeks of the semester.
Recommended reading, lecture notes
Lecture notes
unavailable
Electronic lecture notes
available – www.isis.tu-berlin.de
Recommended literature
- Literaturhinweise zur Veranstaltung werden zu Beginn des Semesters und in den Vorlesungen gegeben
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Business Mathematics Business Mathematics (M. Sc.) - StuPO 2014 | SS 2025 | Wirtschaftswissenschaften › Wirtschaftswissenschaften - BWL › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) |
| Business Mathematics StuPO 2014 | SS 2025 | Wirtschaftswissenschaften › Wahlpflichtmodule |
| Economics StuPO 2022 | SS 2023 | Compulsory Elective Area › Specialisation Courses › Specialisation Courses |
| WS 2023/24 | Compulsory Elective Area › Specialisation Courses › Specialisation Courses | |
| SS 2024 | Compulsory Elective Area › Specialisation Courses › Specialisation Courses | |
| WS 2024/25 | Compulsory Elective Area › Specialisation Courses › Specialisation Courses | |
| SS 2025 | Compulsory Elective Area › Specialisation Courses › Specialisation Courses | |
| Economics StuPo 2018 | SS 2023 | Compulsory Elective Modules › Specialisation Courses › Economic Specialisation Courses |
| WS 2023/24 | Compulsory Elective Modules › Specialisation Courses › Economic Specialisation Courses | |
| SS 2024 | Compulsory Elective Modules › Specialisation Courses › Economic Specialisation Courses | |
| Economics and Sustainability StuPO 2024 | WS 2024/25 | Wahlpflichtbereich › Nachhaltigkeit und Technik |
| SS 2025 | Wahlpflichtbereich › Nachhaltigkeit und Technik | |
| Electrical Engineering (teacher training) StuPO 2015 | SS 2025 | Fachwissenschaftlicher Vertiefungsbereich |
| Industrial Engineering and Management Industrial Engineering and Management (B. Sc.) - StuPO 2015 | SS 2023 | Wirtschaftswissenschaften › Wirtschaftswissenschaften (Wahlpflicht) › Betriebswirtschaftslehre (Wahlpflicht) |
| WS 2023/24 | Wirtschaftswissenschaften › Wirtschaftswissenschaften (Wahlpflicht) › Betriebswirtschaftslehre (Wahlpflicht) | |
| SS 2024 | Wirtschaftswissenschaften › Wirtschaftswissenschaften (Wahlpflicht) › Betriebswirtschaftslehre (Wahlpflicht) | |
| WS 2024/25 | Wirtschaftswissenschaften › Wirtschaftswissenschaften (Wahlpflicht) › Betriebswirtschaftslehre (Wahlpflicht) | |
| SS 2025 | Wirtschaftswissenschaften › Wirtschaftswissenschaften (Wahlpflicht) › Betriebswirtschaftslehre (Wahlpflicht) | |
| Industrial Engineering and Management Industrial Engineering and Management (M. Sc.) - StuPO 2015 | SS 2023 | Wirtschaftswissenschaften/Economic Sciences › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) › Marketing, Innovation, & Entrepreneurship |
| WS 2023/24 | Wirtschaftswissenschaften/Economic Sciences › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) › Marketing, Innovation, & Entrepreneurship | |
| SS 2024 | Wirtschaftswissenschaften/Economic Sciences › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) › Marketing, Innovation, & Entrepreneurship | |
| WS 2024/25 | Wirtschaftswissenschaften/Economic Sciences › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) › Marketing, Innovation, & Entrepreneurship | |
| SS 2025 | Wirtschaftswissenschaften/Economic Sciences › Betriebswirtschaftslehre/Management (Wahlpflicht/Compulsory-Elective) › Marketing, Innovation, & Entrepreneurship | |
| Information Systems Management Information Systems Management (B. Sc.) - StuPO 2015 | SS 2025 | Wahlpflichtbereich › Wirtschaftswissenschaften |
| Information Systems Management Information Systems Management (B. Sc.) - StuPO 2021 | SS 2025 | Wahlpflichtbereich › Wirtschaftswissenschaften |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Profilmodule › Produkte |
| SS 2024 | Wahlpflichtmodule › Profilmodule › Produkte | |
| WS 2024/25 | Wahlpflichtmodule › Profilmodule › Produkte | |
| SS 2025 | Wahlpflichtmodule › Profilmodule › Produkte | |
| Metals Engineering (teacher training) Metals Engineering (teacher training) (M. Ed.) - StuPO 2015 | SS 2025 | Fachwissenschaftlicher Vertiefungsbereich |
| Sustainable Management StuPO 2022 | SS 2023 | Compulsory Elective Area › Profile Studies › Focus: Economy and Development |
| WS 2023/24 | Compulsory Elective Area › Profile Studies › Focus: Economy and Development | |
| SS 2024 | Compulsory Elective Area › Profile Studies › Focus: Economy and Development | |
| WS 2024/25 | Compulsory Elective Area › Profile Studies › Focus: Economy and Development | |
| SS 2025 | Compulsory Elective Area › Profile Studies › Focus: Economy and Development | |
| Sustainable Management StuPo 2016 | SS 2023 | Compulsory Elective Area › Practical Studies › 1 Practical Module + 1 Advanced Module › Advanced Modules |
| WS 2023/24 | Compulsory Elective Area › Practical Studies › 1 Practical Module + 1 Advanced Module › Advanced Modules | |
| SS 2024 | Compulsory Elective Area › Practical Studies › 1 Practical Module + 1 Advanced Module › Advanced Modules |
Miscellaneous
Upon passing the module (lecture and exercise), students receive the industry-recognized certificate "DIN Standards Expert - Module 1: Fundamentals of Standardization".