Production Technology in MicrotechnologyModule description #50275 / Version 3
- 6 CP
- Portfolio examination
- Graded
- Winter semester
- German
| Module / Version | #50275 / #3 |
|---|---|
| Validity | Since WS 2018/19 |
| Available language(s) | German |
| Credit points | 6 |
| Person responsible for the module | Kühne, Stefan |
| Grading | Graded |
| Exam format | Portfolio examination |
| Language(s) of instruction | German |
Affiliation
| Faculty | Fakultät V |
|---|---|
| Institute | Institut für Werkzeugmaschinen und Fabrikbetrieb (IWF) |
| Academic chair | 35361700 FG Mikro- und Feingeräte |
Contact
| Office | PTZ 7 |
|---|---|
| Contact person | Kühne, Stefan |
| E-mail address | kuehne@mfg.tu-berlin.de |
| Website | http://www.mfg.tu-berlin.de/menue/lehre/fertigungsverfahren_der_mikrotechnik/ |
Learning outcomes
With a successfully completed module the students have:
- Knowledge of the fundamentals of modern manufacturing processes that have been transferred from semiconductor technology to microtechnology and of the design and functional principles of the most important devices and systems as well as of the processes and the achievable results
- Knowledge of the applications based on product examples
- Skills in the application of methods and the use of selected equipment in the exercises
- Competences regarding the applications of the processes
- Knowledge regarding the achievable results and the limits of microtechnical processes
- Knowledge of the fundamentals of modern manufacturing processes that have been transferred from semiconductor technology to microtechnology and of the design and functional principles of the most important devices and systems as well as of the processes and the achievable results
- Knowledge of the applications based on product examples
- Skills in the application of methods and the use of selected equipment in the exercises
- Competences regarding the applications of the processes
- Knowledge regarding the achievable results and the limits of microtechnical processes
Content
The lecture concentrates on modern microtechnical manufacturing processes and systems, whereby the functions and areas of application of the devices and manufacturing processes are introduced and explained:
Clean room technology, photo- and electron beam lithography, LIGA technology, surface and coating technologies, dry etching processes, silicon micromechanics, assembly atechnologies
Product examples are presented for all processes.
In the exercises, tasks from the areas of photolithography, coating technology and etching processes are carried out under clean room conditions.
Clean room technology, photo- and electron beam lithography, LIGA technology, surface and coating technologies, dry etching processes, silicon micromechanics, assembly atechnologies
Product examples are presented for all processes.
In the exercises, tasks from the areas of photolithography, coating technology and etching processes are carried out under clean room conditions.
Module components
Compulsory area
The following courses are mandatory for this module:
Workload and credit points
Experimentelle Übungen zu den Fertigungsverfahren der Mikrotechnik (Exercise)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
Fertigungsverfahren der Mikrotechnik / Production processes in microtechnology (Lecture)
| Workload description | Multiplier | Hours | Total |
|---|---|---|---|
| Präsenzzeit | 15 | 2 h | 30 h |
| Vor-/Nachbereitung | 15 | 4 h | 60 h |
| 90 h | |||
The workload of the module adds up to 180 hours. The module therefore comprises 6 credit points.
Description of teaching and learning methods
Lecture: Presentation of the contents with numerous examples from development and production
Exercises as block events: Introduction to selected plants and processes in photolithography, thin-film technology and etching technology, implementation of the processes under clean room conditions in the microtechnical laboratory of the Helmholtz Centre Berlin for Materials and Energy in Berlin-Adlershof
Exercises as block events: Introduction to selected plants and processes in photolithography, thin-film technology and etching technology, implementation of the processes under clean room conditions in the microtechnical laboratory of the Helmholtz Centre Berlin for Materials and Energy in Berlin-Adlershof
Requirements for participation and examination
Desirable prerequisites for participation in the courses:
a) obligatory: none
b) desirable: good physical knowledge
b) desirable: good physical knowledge
Mandatory requirements for the module examination registration:
This module has no examination requirements.
Completion of the module
| Grading | Graded |
|---|---|
| Exam format | Portfolio examination |
| Type of portfolio examination | 100 points in total |
| Language | German |
Test elements
| Name | Points/Weight | Category | Duration/Extent |
|---|---|---|---|
| Protokoll | 50 | written | |
| Prüfung | 50 | oral | 45 min |
Exam description
Oral examination of the lecture contents at the end of the semester, evaluation of the exercise protocols
Summary to an overall grade
Summary to an overall grade
Duration of the module
The following number of semesters is estimated for taking and completing the module: 1 semester(s).
This module can be started in the following semesters: Winter semester.
Maximum number of participants
The maximum capacity of participants is 100.
Registration procedures
Will be organized in the lecture.
Recommended reading, lecture notes
Lecture notes
available – in der Vorlesung
Electronic lecture notes
available
Recommended literature
No recommended literature given
Assigned programs
This module version is used in the following programs:
| Program / program version | Semester(s) | Curriculum component |
|---|---|---|
| Computational Engineering Science (Informationstechnik im Maschinenwesen) StuPO 2018 | SS 2025 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik |
| WS 2025/26 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| SS 2026 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| WS 2026/27 | 6. Schwerpunkte › 6.3 Konstruktion und Fertigung › 6.3.2 Produktionstechnik | |
| Engineering Science StuPO 09.01.2012 | SS 2025 | 06. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | 06. Schwerpunkte › 6.4 Festkörpermechanik | |
| Engineering Science StuPO 2020 | SS 2025 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik |
| WS 2025/26 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| SS 2026 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| WS 2026/27 | Wahlpflichtmodule › 6. Schwerpunkte › 6.4 Festkörpermechanik | |
| Mechanical Engineering StuPO 2017 | WS 2023/24 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik |
| SS 2024 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| WS 2024/25 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| SS 2025 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| WS 2025/26 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| SS 2026 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| WS 2026/27 | Wahlpflichtmodule › Schwerpunktmodule › Produktorientierung › Mechatronik und Mikrotechnik | |
| Technomathematics Technomathematics (B. Sc.) - StuPO 2014 | SS 2025 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Mikrotechnik |
| WS 2025/26 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Mikrotechnik | |
| SS 2026 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Mikrotechnik | |
| WS 2026/27 | Studienrichtungen › Technisches Gebiet - Maschinenbau › Schwerpunkt › Mikrotechnik | |
| Transport Systems StuPO 2018 | SS 2025 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen |
| WS 2025/26 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen | |
| SS 2026 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen | |
| WS 2026/27 | A. Grundlagen › 2. Wahlpflichtbereich › 2.3 Technisch-methodische Grundlagen |
Maschinenbau insbesodere Schwerpunkt Mikrotechnik
Miscellaneous
Literature: Notes in VL
The lecture is offered in German and English.
The lecture is offered in German and English.